Wood Care Set - Teak Wood Brightener and Teak & Hardwood Care Oil

Wood Care Set

The Wood Care Set is ideal for maintaining and protecting wood surfaces. It includes the Teak Wood Brightener to refresh and clean weathered and greyed wood, and the Teak & Hardwood Care Oil, which is water- and dirt-repellent.

Teak Wood Brightener

A highly effective specialized product for refreshing and cleaning faded and greyed exterior wood. Treated wood surfaces regain an almost new appearance, while the natural character of the wood is restored.

Features:

• Restores the natural beauty of the wood

• Easy to use without sanding

• Suitable for all types of teak and hardwood

• Coverage: up to 40 m² / 1 liter

Applications:
Garden furniture, wooden fences, palisades, garden sheds, wooden terraces, carports, planter boxes, and more.

Instructions for Use:
Pre-wet the surfaces with water. Apply the Teak Wood Brightener, either undiluted or diluted up to 1:5 with water depending on the degree of greying. Brush into the wood along the grain using a stiff root brush. After approximately 10–15 minutes, remove the loosened greying with a stiff brush and plenty of water. Clean tools with water after use.

Content: 1000 ml

Teak & Hardwood Care Oil

A high-yield, brushable protective wood coating based on natural oils for untreated hardwood, tropical woods, and softwoods, suitable for indoor and outdoor use. The easily spreadable oil does not form a surface layer but penetrates into the wood, coating the pores. It repels water and dirt, reduces greying, swelling, and shrinking, minimizes cracking and drying, and provides a natural, semi-matte color refresh. Treated surfaces are easy to maintain and resistant to staining liquids, environmental influences, and UV exposure.

Features:

• Water- and dirt-repellent

• Reduces cracking and drying

• Ideal for garden furniture, privacy screens, and terraces

• Coverage: approx. 10–22 m² / 1 liter

Applications:
Untreated hardwood, tropical, softwoods, and exotic woods, such as teak, eucalyptus, thermally treated wood, pressure-treated pine, Douglas fir, Bangkirai, cedar, oak, larch, robinia, and more. Ideal for wooden decks, terraces, garden furniture, privacy screens, planters, palisades, sheds, carports, fences, furniture, doors, wall paneling, and more.

.


 

Instructions for Use:
Wood with high resin or natural content should weather for at least 6 weeks before first treatment. Newly pressure-treated wood should weather for at least 3 months. Old paint or lacquer coatings must be completely removed. The surface must be dry, clean, absorbent, sound, and free from grease, oil, and wax (max. wood moisture 20%, minimum temperature 10 °C). Shake well before use. Apply undiluted with a firm brush or lint-free cloth in the direction of the grain. Remove excess material after approx. 15 minutes with a cloth. Allow to dry for about 12 hours under good ventilation. For highly absorbent or heavily used surfaces, a second coat may be applied. Full hardness is achieved after approx. one week.

Content: 1000 ml

Signal Word: Danger / Caution

Hazard Statements:

• H304: May be fatal if swallowed and enters airways.

• H319: Causes serious eye irritation.