Better grip when showering and bathing – with a liner that stays in your tub. The self-adhesive anti-slip mat for showers and bathtubs from AntiSlide combines a vinyl surface that feels comfortable against the skin with a thin, discreet finish.
The flexible, finely textured surface has a rubber-like feel and provides an R10 slip resistance rating. Used as a self-adhesive bath or shower liner, it is applied directly to the prepared base and designed to stay in place for long-term use.
Premium material for lasting comfort
Our self-adhesive anti-slip mat is made from high-quality, finely textured premium vinyl. Its flexible, rubber-like surface feels comfortable against the skin and combines a low-profile design with R10 slip resistance. Designed for long-term use in showers and bathtubs, the material is easy to clean directly in place.
Your benefits at a glance
Better grip: Slip-resistant surface with an R10 rating.
Comfortable against the skin: Flexible vinyl with a fine texture and rubber-like feel.
Less everyday effort: Clean it directly in the tub – regular removal and hanging up to dry are no longer needed.
Easy DIY application: Self-adhesive backing protected by a white release liner.
Cut to fit: Adapt it to your tub's size, shape and drain position using scissors or a utility knife.
Discreet appearance: Available in White or Transparent.
Designed to stay in place: Full-surface adhesion creates one continuous anti-slip area.
Keep your options open: Removable without leaving adhesive residue.
The finely textured vinyl surface feels comfortable underfoot and against the skin. The thin anti-slip liner blends into your existing bathtub or shower tray, creating a continuous slip-resistant area.
The product is a self-adhesive anti-slip film: a flexible vinyl liner that adheres directly to a suitable surface.
Application illustration: a thin anti-slip surface in an existing shower tray.
The liner stays in place – even during cleaning.
Clean your self-adhesive anti-slip mat directly in the bathtub or shower tray. There is no need to regularly lift out a loose mat, clean its underside separately and hang it up to dry.
Clean the surface with a product suitable for both the liner and your tub, then rinse with clean water. Afterwards, use a soft-bladed squeegee to remove the water. Caring for your liner fits easily into your usual bathroom cleaning routine.
Regular removal of soap and personal care residues helps maintain slip resistance. Follow the care guidance in the product instructions.
The right liner for your shower or bathtub
Shower liner: 70 × 70 cm
The square format provides a generous anti-slip area for standing in your shower tray. Choose your self-adhesive shower liner in White or Transparent and trim it to fit if required.
Bath liner: 70 × 35 cm
The rectangular format fits the base of your bathtub – for example, where you stand when showering. The comfortable vinyl surface and cleaning directly in the tub make this bath liner a practical everyday solution.
Application illustration: the transparent liner lets the bathtub colour show through.
Application
Size
Colours
Shower tray
70 × 70 cm
White or Transparent
Bathtub
70 × 35 cm
White or Transparent
Choosing the right size: Measure the flat base of your bathtub or shower tray. The dimensions shown are the dimensions of the liner. Plan its position so that the drain remains clear.
White or Transparent – to suit your bathroom
White: a bright, coordinated finish
The white anti-slip mat adds a bright, uniform anti-slip area to your tub. A lovely choice for white bathtubs and shower trays.
Transparent: discreet and translucent
The transparent version lets the underlying colour show through. It is particularly useful when you want to keep your tub's original colour visible – including coloured bathtubs and shower trays.
Easy to cut to size – including around the drain
Use ordinary scissors or a utility knife to adapt the liner to the size and shape you need. Cut it on a suitable cutting surface.
The anti-slip film can also be used with a centrally positioned drain: simply cut out the drain area so that water can flow away freely. You can also trim the liner to smaller dimensions or follow particular contours.
Easy DIY application
The self-adhesive backing is protected by a white release liner. With careful preparation, you can apply the anti-slip liner yourself to a suitable bathtub or shower tray surface.
Measure and trim: Decide on the position and trim the liner on a suitable cutting surface if required. Keep the drain clear.
Prepare: Thoroughly clean the base according to the product instructions and allow it to dry completely.
Apply: Gradually peel away the white release liner and press the anti-slip liner down evenly, avoiding air bubbles.
Finish: Follow the application guidance and the instructions regarding when the surface can first be used.
Application illustration: peel away the backing gradually and press the liner down carefully.
A practical application aid: A suitable pressure roller helps you press the liner down evenly. You can find suitable accessories in the product recommendations below this description.
Designed to stay in place. Removable without residue.
The self-adhesive liner is designed to remain in your bathtub or shower tray for long-term use. Full-surface adhesion creates one continuous anti-slip area that you can clean as part of your everyday routine.
If you wish to replace the liner or update your bathroom later, it can be removed without leaving adhesive residue. Enjoy better grip in everyday use while keeping your options open.
Frequently asked questions about the self-adhesive anti-slip mat
How does it differ from a conventional anti-slip mat?
This anti-slip mat is a thin vinyl liner with a self-adhesive backing. It adheres directly to the prepared base and stays in place during cleaning. Regular removal and separate drying of a loose suction-cup mat are no longer needed.
Does the surface feel comfortable against the skin?
Yes. The flexible vinyl has a fine texture with a rubber-like feel and is comfortable underfoot and against the skin.
What slip resistance rating does the liner have?
The anti-slip liner has an R10 slip resistance rating.
Which size do I need?
The liner is available in 70 × 70 cm for shower trays and 70 × 35 cm for bathtubs. Measure the flat base and trim the liner to fit if required.
Can I cut out an opening for a central drain?
Yes. Use scissors or a utility knife on a suitable cutting surface to trim the liner. Cut out the drain area so that water can flow away freely.
Can I apply the anti-slip mat myself?
Yes. The self-adhesive liner is designed for DIY application. Prepare the suitable surface according to the instructions, gradually peel away the white release liner and press the anti-slip liner down evenly.
How do I clean and dry the liner?
Clean the surface directly in the tub with a suitable cleaning product and rinse with clean water. Afterwards, use a soft-bladed squeegee to remove the water. The liner stays adhered to the surface.
Can I remove the liner later?
Yes. The self-adhesive anti-slip mat can be removed without leaving adhesive residue whenever required.
Which colours are available?
Both sizes are available in White or Transparent. The transparent version lets the original colour show through and is a discreet option for coloured bathtubs and shower trays.
Choose your size and colour
Select your self-adhesive anti-slip mat: 70 × 70 cm for shower trays or 70 × 35 cm for bathtubs – available in White or Transparent.
Would you like personal advice? Send us a photo of your bathtub or shower tray and tell us the material and dimensions of the intended application area. We will be happy to help you choose.