Anti-Slip Floor Coating for Indoor & Outdoor Use – White/Grey (R13)

This easy-to-apply anti-slip floor coating is the ideal solution for improving safety on floors exposed to light and medium wear – both indoors and outdoors. Thanks to its high slip resistance (R13), it reliably reduces the risk of slipping even on wet or demanding surfaces.
 

Product Description:

The anti-slip floor coating can be applied to a wide variety of substrates, including concrete, wood, asphalt, steel, sheet metal, glass, fiberglass, lead, mineral tiles and paving stones. The material is flexible and absorbs movements of the substrate, ensuring long-lasting adhesion and durability.

It bonds extremely well with the existing surface and forms either a structured or a closed, slip-resistant coating. On uneven or highly movable surfaces with joints, we recommend applying 2–3 layers, as the material slightly contracts during curing (from approx. 1 mm when wet to around 0.7 mm when fully cured).
Each additional layer can be applied after 4–6 hours, depending on drying conditions.

The coating is a solvent-free, two-component system based on polymer/cement, combined with mineral aggregate and hardener. Its white-grey color creates a clean, functional appearance suitable for many environments.
 

Key Features & Properties:

• Very easy to apply – no specialist knowledge required

• Simple application using a paint roller or trowel

• Excellent adhesion to almost all indoor and outdoor surfaces

• Can be applied to previously coated substrates (multi-layer capable)

• One to three layers depending on usage intensity

• Flexible material absorbs substrate movement

• Highly slip-resistant surface R13 (ASR A1.5/1,2)

• Impermeable and UV-stable

• Easy to clean and maintain

• No primer required

• Can also be applied to slightly damp surfaces
   

Consumption:
17 kg unit covers approx. 9 m² (at a layer thickness of 1000 microns)
 

Drying & Curing Times:

• Light foot traffic after approx. 12–16 hours

• Full load after approx. 72 hours

• Full curing time: 7–10 days (depending on temperature and humidity)
   

Application Conditions:

• Application temperature: +10°C to +30°C

• Surface must be clean, broom-clean and grease-free
   

Areas of Application:

• Light to medium-duty use in commercial and industrial facilities

• Indoor and outdoor areas

• Warehouses without forklift traffic

• Ramps and inclines

• Parking areas

• Outdoor spaces and walkways

• Sports and playground areas

Hazard Pictograms and Information:

Signal Word: Warning

Hazard Statements:
May cause allergic skin reactions.

Always read the label and product information before use.